Phoenix Bluetooth seriële poortadapter Manual descargar pdf (Pagina 3)

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 3

ample, the Bluetooth Device Address 0x112233AABBCC is

represented as 112233AABBCC or 112233aabbcc. Note

that the Bluetooth Device Address is not delimited with by

two double-qoute (“"“) characters.

4 AT Commands Reference

4.1 Standard AT Commands

Command “AT”

Command “AT*”

Command “AT&F”

When using an AT command, please note the restrictions for the module which are noted below the respective AT

command description.

AT Command Description

AT<CR> Attention command determining the presence of a DCE, i.e.

the Serial Port Adapter.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

AT Command Description

AT*<CR> Lists the supported AT commands.

Responses Description

<CR><LF><command> This response is sent to the host for every supported com-

mand.

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

AT Command Description

AT&F<CR> If the command Store_Factory_Settings has been used to fill

the factory settings database then this command will restore

all the settings to the factory settings.

If the command Store_Factory_Settings has not been used

to fill the factory settings database then this command will do

nothing.

Note that this command should not be used at every startup

to restore the factory settings. Instead it is better not to write

to the startup database at all.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

1 2 3 4 5 6 7 8 ... 42 43

Sin comentarios

Phoenix Bluetooth seriële poortadapter Manual Pagina 3