Phoenix Bluetooth seriële poortadapter Manual descargar pdf (Pagina 4)

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 4

Command “ATS2”

Command “ATE”

Module Constraint

FL BT SPA The Store_Factory_Settings are not available. Instead, the

command will restore production settings. After the AT&F

command has been sent, the module must be reset for the

restored settings to take affect.

AT Command Description

ATS2=<esc_char><CR> Changes the escape character to esc_char.

Command Parameters Type Description

esc_char integer esc_char is the ASCII value of the new escape character. E.g. 47 equals ‘/’. The

default value is ‘/’.

Note that the escape sequence will be “///”. Hence, the character is used three

times.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

AT Command Description

ATE<echo><CR> Set whether or not the Serial Port Adapter shall echo inco-

ming characters.

Command Parameters Type Description

echo integer 0: Incoming characters will not be echoed.

1: Incoming characters will be echoed.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

1 2 3 4 5 6 7 8 9 ... 42 43

Sin comentarios

Phoenix Bluetooth seriële poortadapter Manual Pagina 4