Phoenix Bluetooth seriële poortadapter Manual descargar pdf (Pagina 5)

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 5

5 GAP Commands

5.1 Read_Discoverability_Mode (AT*AGDM?)

Write_Discoverability_Mode (AT*AGDM=)

AT Command Description

AT*AGDM?<CR> This command reads the current GAP discoverability mode.

Responses Description

<CR><LF>*AGDM:<discoverability_mode><CR><LF>OK<

CR><LF>

Successful response.

<CR><LF>ERROR<CR><LF> Error response.

Response Parameters Type Value

discoverability_mode enumerator 1: GAP non-discoverable mode

2: GAP limited discoverable mode

3: GAP general discoverable mode (default value)

AT Command Description

AT*AGDM=<discoverability_mode>,

<store_in_startup_database><CR>

This command writes the current GAP discoverability mode.

Command Parameters Type Value

discoverability_mode enumerator 1: GAP non-discoverable mode

2: GAP limited discoverable mode

3: GAP general discoverable mode (default value)

store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

Module Constraint

FL BT SPA Limited discoverability mode not supported.

1 2 3 4 5 6 7 8 9 10 ... 42 43

Sin comentarios

Phoenix Bluetooth seriële poortadapter Manual Pagina 5