Phoenix Bluetooth seriële poortadapter Manual descargar pdf (Pagina 7)

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 7

Write_Pairing_Mode (AT*AGPM=)

Read_Security_Mode (AT*AGSM?)

Write_Security_Mode (AT*AGSM=)

AT Command Description

AT*AGPM=<pairing_mode>,<store_in_startup_database>

<CR>

Writes the GAP pairing mode.

Command Parameters Type Value

pairing_mode enumerator 1: GAP non-pairable mode.

2: GAP pairable mode (default value).

store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

AT Command Description

AT*AGSM?<CR> Reads the GAP security mode.

Responses Description

<CR><LF>*AGSM:<security_mode><CR><LF>OK<CR><

LF>

Successful response.

<CR><LF>ERROR<CR><LF> Error response.

Result Parameters Type Value

security_mode enumerator 1: Link level authentication and encryption disabled (GAP security mode 1 with

encryption disabled). (default value)

2: Link level authentication and encryption enabled (GAP security mode 3 with

encryption enabled).

AT Command Description

AT*AGSM=<security_mode>,<store_in_startup_database>

<CR>

Writes the GAP security mode.

Command Parameters Type Value

security_mode enumerator 1: Link level authentication and encryption disabled (GAP security mode 1 with

encryption disabled). (default value)

2: Link level authentication and encryption enabled (GAP security mode 3 with

encryption enabled).

store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

1 2 3 4 5 6 7 8 9 10 11 12 ... 42 43

Sin comentarios

Phoenix Bluetooth seriële poortadapter Manual Pagina 7